Pebble Rock Flooring™

Premium Epoxy and Rock Flooring

• Provides unlimited design possibilities
  

• Brand Pebble Rock Flooring with corporate logos
  

• 2 color (or more) designs for borders, walkways, etc.
  

• Carries a 10 Year Warranty Summary

The Pebble Rock™ Flooring System is comprised of:

Seamless Premium Primer™
Seamless Premium Primer™ is a water based, 25% solids, single component epoxy acrylic hybrid used for priming concrete and cement board surfaces. It has been specially formulated for providing excellent adhesion between concrete surfaces and our epoxy binders with the added protection against efflorescence that may be present in concrete substrates. Cure time is 10-20 minutes.

Seamless Vapor Seal Primer™
Seamless Vapor Seal Primer™ is a clear (may be pigmented), 100% solids, two component, low viscosity, moisture accepting primer. It has an ability to reduce the hydrostatic pressure emitted by the floor from 12 Lbs. per 1000 square feet to less than 1 Lb. This product can even cure underwater without affecting its adhesion. When applied at 72°F / 50% humidity, Seamless Vapor Seal Primer™ is a 5-7 hour cure with excellent adhesion.

Seamless Substrate Epoxy Wet Primer™
Seamless Substrate Epoxy Wet Primer™ is an economical, high strength, 100% solids, two component, low viscosity, moisture tolerant epoxy formulated specifically for use in wet priming surfaces in preparation for installing our seamless epoxy flooring systems. This is developed for indoor or outdoor installations. When applied at 72°F / 50% humidity, Seamless Substrate Epoxy Wet Primer™ provides excellent adhesion. It is not necessary for this primer to cure before commencing installations.

Seamless Premium Outdoor Binder™
Seamless Premium OUTDOOR Binder™ with nano-fleck technology is a high strength, 100% solids, two component, low viscosity, moisture tolerant epoxy formulated specifically for the bonding of Pebble Rock™ Flooring aggregate. This is developed for outdoor installations. For indoor use, please refer to our special formulation, Seamless Premium INDOOR Binder™. When applied at 72°F / 50% humidity, Seamless Premium OUTDOOR Binder™ is a 8-12 hour cure (depending on temperature) with excellent adhesion. Don't be fooled again by rock and epoxy aggregate systems that use the same epoxies for outdoor and indoor use.

Seamless One-Coat OUTDOOR Sealer™
Seamless One-Coat OUTDOOR Sealer™ is a high solids, low viscosity, polyaspartic polyurea. It is used predominantly for the sealing of Pebble Rock™ Flooring aggregate installed outdoors, however, it has many other uses depending upon location and conditions of our other epoxy flooring installations. Seamless One-Coat OUTDOOR Sealer™ adds binding properties to the flooring surface, but does not create an impervious surface. This has a quick dry time coupled with its UV resistance, mar resistance, and chemical resistance and will out-perform most other types of sealers or topcoats. When applied at 72°F / 50% humidity, Seamless One-Coat OUTDOOR Sealer™ is a 4-12 hour cure with excellent adhesion.

Seamless Premium Indoor Binder™ (Regular or Fast Cure Formula)
Seamless Premium INDOOR Binder™ is a high strength, 100% solids, two component, low viscosity, moisture tolerant epoxy formulated specifically for the bonding of Pebble Rock™ Flooring aggregate. This is developed for indoor installations. For outdoor use, please refer to our special formulation, Seamless Premium OUTDOOR Binder™ with nano-fleck technology. When applied at 72°F / 50% humidity, Seamless Premium INDOOR Binder™ is a 8-12 hour cure (depending on temperature) with excellent adhesion.

Seamless Final Coat Indoor Sealer™ (Regular or Fast Cure Formula)
Seamless Final Coat INDOOR Sealer™ is a high strength, 100% solids, two component, low viscosity, moisture tolerant epoxy formulated with anti-bubble agents specifically for the sealing of Pebble Rock™ Flooring aggregate. This is developed for indoor installations. Seamless Final Coat INDOOR Sealer™ adds binding properties to the flooring surface, but does not create an impervious surface. For outdoor use, please refer to our special formulation, Seamless One-Coat OUTDOOR Sealer™. When applied at 72°F / 50% humidity, Seamless Final Coat INDOOR Sealer™ is a 8-12 hour cure with excellent adhesion.

Seamless Anti-Microbial Additive™
Seamless Anti-Microbial Additive™ is a highly effective additive used to cease mildew and algae growth in accordance with ASTM D5590-00 and Algae Resistance Test 1.3.Alg.1. This may be added to our 100% solids epoxy binders, base coat and top coat formulas at 4 ounces per gallon.

Seamless Substrate Epoxy™
Seamless Substrate Epoxy™ is an economical, high strength, 100% solids, two component, low viscosity, moisture tolerant epoxy formulated specifically for use in repairing concrete cracks in preparation for installing our seamless epoxy flooring systems. Normally mixed with our Seamless Binder Thickener™, this is developed for indoor or outdoor installations. When applied at 72°F / 50% humidity, Seamless Substrate Epoxy™ is a 8-12 hour cure (depending on temperature) with excellent adhesion.

Seamless Waterproof Membrane™
Seamless Waterproof Membrane™ is a white, 100% solids, two component aliphatic polyurea elastomeric membrane used for waterproofing. It has been specially formulated for durability and longevity. It is highly resistant against subzero temperatures as well as excessive temperatures above 180° F. It remains flexible at all temperature ranges and will not become brittle. This formula is UV resistant and may be left exposed to the outdoor environment without an epoxy flooring systems.

Seamless Waterproof Membrane Non-Wear Layer™
Seamless Waterproof Membrane Non-Wear Layer™ is an economical, clear, 100% solids, two component epoxy-based membrane used for waterproofing. It has been specially formulated for durability and longevity. It is highly resistant against subzero temperatures as well as excessive temperatures above 180° F. It remains flexible at all temperature ranges and will not become brittle. Without UV resistant properties, it must be covered with one of our epoxy flooring systems.

Seamless One-Step OUTDOOR Binder™
Seamless One-Step OUTDOOR Binder™ is a 90% solids, two component, low viscosity, polyaspartic polyurea formulated specifically for the bonding of Pebble Rock™ Flooring aggregate. This is developed for one-step outdoor repairs of competitor's failed products and includes UV inhibitors that eliminate the need to return for application of a sealer coat. This will last between the repair and the next bi-annual sealing. For indoor use, please refer to our special formulation, Seamless Premium INDOOR Binder™. When applied at 72°F / 50% humidity, Seamless One-Step OUTDOOR Binder™ is a 2-4 hour cure (depending on temperature) with excellent adhesion. Due to the lower compressive strength, the use of this product is limited to foot traffic areas only. Do not use this product on driveways or where vehicle traffic will occur. Instead, use our Seamless Premium OUTDOOR Binder™ and follow with Seamless One-Coat OUTDOOR Sealer™

Seamless Premium OUTDOOR Binding Sealer™
Seamless Premium OUTDOOR Binding Sealer™ is a high strength, 100% solids, two component, low viscosity, moisture tolerant epoxy formulated with anti-bubble agents specifically for the repair of competitor's rock and epoxy aggregate systems. This is developed for outdoor installations. Seamless Premium OUTDOOR Binding Sealer™ adds binding properties to the flooring surface, but does not create an impervious surface. For indoor use, please refer to our special formulation, Seamless Final Coat INDOOR Sealer™. When applied at 72°F / 50% humidity, Seamless Premium OUTDOOR Binding Sealer™ is a 8-12 hour cure with excellent adhesion.

Seamless Premium Asphalt Epoxy™
Seamless Premium Asphalt Epoxy™ is a high strength, highly flexible, 100% solids, two component, low viscosity, moisture tolerant epoxy formulated specifically for the bonding of Pebble Rock™ Flooring aggregate over asphalt surfaces. This is developed for outdoor installations. When applied at 72°F / 50% humidity, Seamless Premium Asphalt Epoxy™ is a 8-12 hour cure (depending on temperature) with excellent adhesion.

Seamless Premium CRU Sealer™ Clear or Satin Finish
Seamless Premium CRU Sealer™ is a high solids, low viscosity, aliphatic polyester polyurethane. This is available in a gloss or satin finish. It is used predominantly for the final sealing coat of Epoxy Quartz™ Flooring or Epoxy Flecks™ broadcast systems located in outdoor areas with severe chemical environments or heavy traffic areas where a satin finish is desired. This also is used for sealing Pebble Rock™ Flooring outdoors where a satin finish is desired. This has UV resistance, mar resistance, and chemical resistance and will out-perform most other types of sealers or topcoats. When applied at 72°F / 50% humidity, Seamless Premium CRU Sealer™ is a 4-12 hour cure with excellent adhesion. For professional use only.

Seamless Premium WB-CRU Sealer™ Clear or Satin Finish
Seamless Premium WB-CRU Sealer™ is a high solids, low viscosity, aliphatic polyurethane. This is available in a gloss or satin finish. It is used predominantly for the final sealing coat of Epoxy Quartz™ Flooring or Epoxy Flecks™ broadcast systems located in indoor areas with severe chemical environments or heavy traffic areas. This also is used for sealing Pebble Rock™ Flooring indoors where no odor and chemical protection is needed such as in restrooms or commercial kitchens. This has UV resistance, mar resistance, and chemical resistance with no solvent odor and will out-perform most other types of sealers or topcoats. When applied at 72°F / 50% humidity, Seamless Premium WB-CRU Sealer™ is a 4-12 hour cure with excellent adhesion. For professional use only.

Seamless Premium Flood Coat™
Seamless Premium Flood Coat™ is a high strength, highly flexible, 100% solids, two component, low viscosity, moisture tolerant epoxy formulated specifically for filling the cured matrix of Pebble Rock™ Flooring. This is used to create a sanitary, non-porous surface for compliance with local health codes. This is developed for indoor installations. For outdoor use, the cured flood must be sealed with Seamless One-Coat OUTDOOR Sealer™. When applied at 72°F / 50% humidity, Seamless Premium Flood Coat™ is a 8-12 hour cure (depending on temperature) with excellent adhesion.

Seamless Countertop Coating™
Seamless Countertop Coating™ is a high strength, glass-clear, 100% solids, two component, low viscosity, epoxy formulated specifically for creating a smooth finish over a flooded matrix of Pebble Rock™ Flooring. This is developed for indoor installations. For outdoor use, the cured product must be sealed with Seamless One-Coat OUTDOOR Sealer™. When applied at 72°F / 50% humidity, Seamless Countertop Coating™ is a 20-72 hour cure (depending on temperature) with excellent adhesion.

Pebble Rock™ Flooring Aggregate
Natural river rock, glass and painted quartz are available for blending with our epoxies for installing our Pebble Rock™ Flooring system. We have the widest selection of colors available anywhere!

Home  |  Products  |  Applications  |  Gallery  |  FAQ |  Epoxy Flooring Data |  Contact Us